Logan Foundation Pros logoLogan Foundation ProsFoundation Repair · Logan, UT
Menu
concrete lifting in Logan, UT

Logan Foundation Pros

Concrete Lifting in Logan, UT

Concrete lifting in Logan, UT: polyurethane foam leveling for driveways, patios, and sidewalks. Free estimates, same-day cure.

Serving Logan and nearby communities.

Sunken slabs around a Logan home usually come from soil settling under the concrete, not a problem with the concrete itself. Cache Valley's clay-heavy soil swells and shrinks through freeze-thaw cycles every winter and spring, leaving voids under driveways, patios, and sidewalks that cause slabs to drop unevenly.

Logan Foundation Pros fixes this with polyjacking, pumping hydrophobic polyurethane foam through dime-sized drill holes to fill the void and raise the slab back to level, without the mess or downtime of mudjacking or a full tear-out.

What's included

What's included with Concrete Lifting

Typically included

  • Slab inspection and void assessment
  • Dime-sized access holes drilled at strategic points
  • Hydrophobic polyurethane foam injection to lift and support the slab
  • Hole patching to blend with the surrounding surface

Optional

  • Joint sealant to protect against future water intrusion
  • Surface sealant for added weather protection

Customer prep

  • Clear vehicles, furniture, and planters from the work area
  • Keep pets and kids off the slab until foam cures

How it works

How our Concrete Lifting process works

  1. Surface Assessment photo
    Step 1

    Surface Assessment

    Uneven or sunken concrete areas are identified and measured.

  2. Drilling Access Holes photo
    Step 2

    Drilling Access Holes

    Small holes are drilled into the concrete to allow material injection.

  3. Material Injection photo
    Step 3

    Material Injection

    Expanding foam is injected beneath the slab to raise it evenly.

  4. Elevation Monitoring photo
    Step 4

    Elevation Monitoring

    Lift progress is measured to achieve the desired level.

  5. Hole Patching photo
    Step 5

    Hole Patching

    Access holes are filled and finished to match the surrounding surface.

  6. Final Inspection photo
    Step 6

    Final Inspection

    The lifted area is reviewed for levelness and stability.

Cost

What does concrete lifting cost in Logan?

Pricing runs by square footage and how much the slab has settled. A free on-site estimate gets you an exact number.

Project typeTypical rangeWhat’s included
Small spot lift$400–$900single slab section or minor trip-hazard correction.
Driveway or patio section$900–$2,500multiple slabs releveled in one visit.
Large multi-slab job$2,500–$5,000+full driveway or patio with several sunken sections.

These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.

Want a number for your home?

Get a Free Estimate

Materials

Materials and methods for Concrete Lifting

Concrete lifting works because the foam itself resists water and compacts the soil it fills, which matters in a climate with recurring freeze-thaw swelling.

  • Polyurethane Foam photo

    Polyurethane Foam

    expands beneath slabs to lift and stabilize concrete surfaces without adding the heavy wet weight that mudjacking slurry does, which matters when Logan's clay soil is already satura

  • Injection Ports photo

    Injection Ports

    allow controlled placement of lifting material under the slab so the crew can target the exact void instead of over-pumping.

  • Patch Compound photo

    Patch Compound

    fills drilled access holes for a smooth finish that holds up to Cache Valley's freeze-thaw cycling.

  • Surface Sealant photo

    Surface Sealant

    protects the repaired area from moisture and staining, important given Logan's snowy, salted winters.

  • Leveling Gauge photo

    Leveling Gauge

    used to measure and confirm slab elevation during lifting so the final grade sheds water correctly.

  • Bonding Agent photo

    Bonding Agent

    improves adhesion between new patch material and existing concrete for a longer-lasting repair.

Timeline

How long does concrete lifting take?

Most jobs wrap up in a single visit since the foam cures fast.

  1. 01

    Inspection

    same day
  2. 02

    Drilling and injection

    2–4 hours

    depending on slab size and number of voids

  3. 03

    Cure time before use

    1–2 hours
  4. 04

    Patch finishing

    same visit

Need a schedule that fits?

Get a Free Estimate

Codes & permits

Permits and codes for Concrete Lifting

Always confirm with Cache County or Logan City before work starts, especially if the slab borders a public right-of-way.

Typically needs a permitOften no permit
Not typical for cosmetic slab lifting on private propertyDriveway slab releveling
—Patio slab releveling
—Sidewalk slab releveling on private property

DIY vs pro

DIY vs hiring a pro for Concrete Lifting

DIYHire a pro
Minor cosmetic touch-ups like filling a small surface crack with patch compoundAny slab that has visibly sunk or created a step-down edge, since the void underneath needs to be filled evenly or the slab will settle again
Monitoring a slight slope change season to season before it becomes a trip hazardDriveway or patio sections near drains or downspouts, where incorrect foam placement can redirect water the wrong way
—Jobs where a level, load-bearing result matters, since DIY kits don't match the precision of professional injection equipment

When to call

When to call for Concrete Lifting

Call Logan Foundation Pros for a free estimate before a small settling problem turns into a bigger trip hazard or water issue.

  • A driveway or patio slab has dropped an inch or more compared to its neighbor
  • Water pools on a slab after rain or snowmelt instead of draining away
  • A sidewalk or patio edge has become a trip hazard
  • Cracking has started at the edge of a settled slab

Before & after

Before and after Concrete Lifting

  • concrete lifting in Logan, UT
    Before
  • concrete lifting in Logan, UT
    After

FAQs

Concrete Lifting FAQs

Is polyurethane foam lifting better than mudjacking?

For most residential jobs. Foam weighs a fraction of mudjacking slurry, cures in hours instead of days, and resists water absorption, which holds up better through Cache Valley's freeze-thaw cycles.

How much does concrete lifting cost in Logan?

Most jobs run $400 to $5,000 depending on slab size and how many sections need lifting. A free estimate gives you an exact number for your project.

Will the holes be visible after the work is done?

The dime-sized access holes are patched and blended with the surrounding concrete. There will be a faint patch mark but it's far less visible than a full slab replacement seam.

Can concrete lifting fix a cracked slab?

Lifting corrects elevation, not cracks. If a slab has significant cracking along with settling, we'll assess whether a patch or partial replacement should happen alongside the lift.

Does concrete lifting work on all types of slabs?

It works well on driveways, patios, and sidewalks that have settled due to soil voids. It's not a substitute for structural foundation repair if your home's foundation itself is moving.

Next step

Get a Concrete Lifting estimate in Logan

Call Logan Foundation Pros at (435) 363-7633 for a free, no-pressure estimate on your sunken driveway, patio, or sidewalk.

Ask about Concrete Lifting

Tell us about the project and how to reach you.

Call (435) 363-7633