Logan Foundation Pros
Foundation Crack Repair in Logan, UT
Foundation crack repair in Logan, UT: epoxy and polyurethane injection for basement cracks. Free estimates.
Serving Logan and nearby communities.
Every spring, Cache Valley's freeze-thaw cycle puts new stress on the cracks already in your basement wall, and it's worth knowing which ones are cosmetic and which ones are structural before deciding what to do. Logan Foundation Pros injects epoxy or polyurethane into cracks depending on the cause, bonding structural cracks back together or sealing out water on cracks that are more about moisture than movement.
A thin vertical crack that's stayed the same size for years is usually cosmetic. A diagonal or horizontal crack, or one that's visibly widened since last year, points to settlement or wall pressure and needs a structural approach. Logan's older basements tend to show more crack activity than newer subdivisions further south, simply because they've been through more freeze-thaw cycles.
What's included
What's included with Foundation Crack Repair
Typically included: crack inspection, injection method selection (epoxy for structural, polyurethane for water-stopping), and interior sealing.
Optional: exterior sealing where accessible, for cracks with active water intrusion.
Customer prep: clear access to the crack location, inside and outside if both are being treated.
Want a clearer scope?
Get a Free EstimateHow it works
How our Foundation Crack Repair process works
Step 1Crack Inspection
Each crack is examined to determine type, width, and cause.
Step 2Surface Cleaning
Debris and loose material are removed from the crack area.
Step 3Injection Port Setup
Ports are installed along the crack to allow material injection.
Step 4Sealant Injection
Epoxy or polyurethane is injected to fill and bond the crack.
Step 5Surface Finishing
Excess material is removed and the surface is smoothed.
Step 6Final Inspection
The repair is checked to confirm a watertight and stable seal.
Materials
Materials and methods for Foundation Crack Repair
Epoxy Injection Resin
Bonds structural cracks for added strength, suited to cracks tied to settlement rather than water.
Polyurethane Foam Sealant
Expands to fill cracks and block water infiltration, the better choice when snowmelt seepage is the main issue.
Injection Ports
Allow controlled delivery of sealant into the crack cavity along its full length.
Surface Primer
Prepares concrete surfaces for proper material adhesion before injection.
Masonry Patch Compound
Used to finish and blend repaired surface areas with the surrounding wall.
Protective Topcoat
Applied to shield the repaired area from future moisture exposure through the freeze-thaw cycle.
Questions on materials?
Get a Free EstimateTimeline
How long does foundation crack repair take?
Crack repair is one of the faster jobs on the list, since most cracks don't need excavation.
- 01
Inspection
same day - 02
Injection and sealing
same dayone to two hours per crack
- 03
Surface finishing
same day
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits and codes for Foundation Crack Repair
Most crack repair jobs don't trigger permitting on their own. Confirm with Cache County or Logan City if your crack is part of a larger structural repair.
| Typically needs a permit | Often no permit |
|---|---|
| Crack repair tied to a larger structural wall stabilization project | Standard cosmetic crack injection (epoxy or polyurethane) |
| — | Interior sealing without structural reinforcement |
Need help with permits?
Get a Free EstimateNext step
Request a free estimate with a written per-crack range.
DIY vs pro
DIY vs hiring a pro for Foundation Crack Repair
| DIY | Hire a pro |
|---|---|
| A true hairline, non-widening vertical crack can often be monitored or sealed with store-bought concrete caulk as a temporary measure. | Store-bought caulk sits on the surface and doesn't bond through the full depth of an active structural crack, so it fails as the crack keeps moving. |
| — | A pro injects sealant through the full crack depth, which is the only way to stop water infiltration and bonding failure for good. |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to call for Foundation Crack Repair
Call Logan Foundation Pros for a free estimate to find out which type of crack you're dealing with.
- A crack that's widening year over year
- Stair-step cracking in a block or brick foundation wall
- Water seepage visible alongside the crack after snowmelt
Seeing warning signs?
Get a Free EstimateFAQs
Foundation Crack Repair FAQs
How do I know if a crack is cosmetic or structural?
A thin, vertical crack that hasn't changed size is usually cosmetic. Diagonal, horizontal, or widening cracks point to structural movement and need a professional diagnosis.
Can a cracked foundation be fixed without digging up the whole yard?
Most crack injection is done from the inside through small ports along the crack, with no excavation required unless the crack is tied to a larger wall or drainage issue.
Is crack injection covered by homeowners insurance?
Most standard policies exclude foundation cracking from soil movement or settling, treating it as a maintenance repair rather than a covered loss.
How much does foundation crack repair cost?
Typical costs run $350-$900 per crack depending on the injection method, with polyurethane for water-stopping and epoxy for structural bonding.
Does epoxy or polyurethane work better for a leaking crack?
Polyurethane expands and is better suited for active water infiltration, while epoxy creates a stronger structural bond for cracks without water issues.
More services
Other Foundation Repair services
Foundation Repair
Foundation repair in Logan, UT: piering, crack injection, and wall stabilization backed by free written estimates.
Piering and Underpinning
Piering and underpinning in Logan, UT: steel and helical piers for sinking foundations. Free written estimates.
Wall Stabilization
Wall stabilization in Logan, UT: anchors and carbon fiber straps for bowing basement walls. Free estimates.
Ask about Foundation Crack Repair
Tell us about the project and how to reach you.